Portable Welding Fume Extractor With Single 3M160mm Flexible Suction Arm For Industrial Dust Collection
Fume generated in working will be sucked into the extractor through the hood, first through the fire resistance net, large particles and sparks produced in grinding is intercepted and separated. Then enter fume directing layer, the deflector to ramify the fume to avoid residual spark into the main filter cartridge directly . At last the fume enters the third layer the main filter cartridge for ultimate purification, and it's filtration efficiency can reach 99.9% . As the filtering precision of the main filter cartridge reach the indoor emission standards, after filtration clean air can be directly discharged indoor through the air vent in the bottom fo the extractor.
On the control panel, it displays.
|No. ||Item ||Parameter |
|1 ||Fan type ||centrifugal fan |
|2 ||Treatment of air flow ||1800±100 m3/h |
|3 ||Motor power ||1.5kW |
|4 ||Power supply ||3*380V ~/50Hz |
|5 ||Filtration area ||8 m2 |
|6 ||Number of filter cartridges ||1 piece |
|7 ||Filter medium ||PTFE Membrane |
|8 ||Filtration efficiency ||>99.9% |
|9 ||Noise ||≤74±5dB(A) |
|10 ||Cleaning way ||Changing filter |
|11 ||One suction arm ||Ø160mm*3m |
|12 ||Weight (excluding suction arm) ||120±5KG |
|13 ||Dimensions(excluding suction arm) ||550×550×1165mm |
1. Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals, precious materials, etc.
2. For the potential of fire and molten slag particles, two protective measures are used inside purifier, to make it a longer life, more secure and reliable.
3. For the KSJ-0.7S semi-automatic model purifier, its electric control is simple, automatically cleaning relying on
the internal pressure sensors, and also can by manual. Filter rotates with the use of semi-automatic cleaning in
all directions, so that there is a more thorough cleaning filter surface, to guarantee a constant air volume
absorption.Filter is made of imported microporous PTFE film , filtering with high precision can meet GB indoor
4. Power phase sequence instructions, short-circuit protection for lack of phase, with shutdown protection
measures when too high temperature.
5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-
resistant compounded materials, without crack and damage to sparks, its life shorter than the model of
6.Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air by pulling
the handle of the hood with the operator’s will flexibly and easily and position by itself in the absence of external
force. Depending on needs, 2m, 3m or 4m flexible suction arm are optional.
7. Suction arm uses real temperature-resistant, flame retardant and wear-resistant composite materials, and will
not crack after burning through by spark with longer life; the arm diameter is160mm.
Package & Shipping
Package: Package Used Wooden Box without Fumigation
The package would include spare parts box and machine installation tools.
Transportation By Sea or By Air are both Acceptable.
Portable Welding Fume Extractor With Single 3M160mm Flexible Suction Arm For Industrial Dust Collection Images